---
title: "Indoor Communication: Buildings and Tunnels — BosNets"
description: "Why does indoor communication fail? Building entry loss, rules for basements, tunnels and mines, channel options and a step-by-step indoor communication plan."
url: https://www.bosnets.com/en/blog/indoor-communication
lang: en
alternate: https://www.bosnets.com/blog/kapali-alanda-iletisim
author: "Emir Tanrıver"
datePublished: 2026-11-14
dateModified: 2026-11-14
source: html
---

# Indoor Communication: A Guide to Team Communication in Buildings, Basements and Tunnels

[Emir Tanrıver (LinkedIn, opens in a new tab)](https://www.linkedin.com/in/emirtnrvr/) 14 November 2026 13 min read

Indoor communication is the link that breaks most often, even on a site where mobile phones work perfectly outside. Basements, underground car parks, metal-clad warehouses, tunnels and mine galleries weaken the signal coming from outside, and sometimes block it completely. This article explains why the signal disappears indoors, which facilities in Türkiye have a written obligation for indoor communication, the channel options available to organisations, and how to plan step by step around the worst point of your site.

## In short

- Building entry loss varies widely from one building to another and from point to point within the same building; in modern, thermally efficient buildings the loss is significantly higher.
- In Türkiye, high-rise buildings, large shopping centres and industrial plants must have an emergency announcement system, and mines must have communication covering the underground workings plus an underground personnel tracking system.
- One channel is not enough indoors: systems that carry the outside signal in and systems that build their own network inside complement each other.
- Plan for the deepest floor and the farthest gallery, not for the average coverage outside; run the drill there too.

## Contents

1. Why does the signal weaken indoors?
1. The hardest indoor spaces and their characteristics
1. Regulation for indoor communication in Türkiye
1. Indoor communication options
1. A benchmark example: in-building coverage for emergency responders
1. An indoor communication plan, step by step
1. Our approach
1. Frequently asked questions
1. Sources

## Why does the signal weaken indoors?

A radio wave loses energy at the outer wall as it enters a building, and again at floor slabs, columns and metal surfaces as it travels inside. [Recommendation ITU-R P.2109-2](https://www.itu.int/rec/R-REC-P.2109-2-202308-I/en) of the International Telecommunication Union (ITU) defines a method for estimating “building entry loss” at frequencies between 80 MHz and 100 GHz. The most important finding of the recommendation is that the loss is not a single number: building entry loss exhibits great variability, both within any given building and between different buildings.

According to the same document, buildings fall into two distinct groups in terms of entry loss. Where modern, thermally efficient building methods are used, such as metallised glass and foil-backed panels, building entry loss is generally significantly higher than for traditional buildings without such materials. The ITU lists metallised glass windows, insulated cavity walls, thick reinforced concrete and metal foil back cladding as indicators of a thermally efficient building. In other words, a new, energy-efficient office building can be more “closed” to communication than an old one.

Measurements confirm this. [Technical Note 1552](https://nvlpubs.nist.gov/nistpubs/Legacy/TN/nbstechnicalnote1552.pdf) of the US National Institute of Standards and Technology (NIST) reports measurements made in the 750 MHz band used by emergency responders, in a convention centre, a high-rise office building, an apartment building and a laboratory building. According to the report, the fundamental challenge for radio signals going into and out of large buildings is the strong attenuation caused by losses and scattering in the building materials and structure, together with the large additional variability caused by multipath reflections. Across the four buildings, median signal values normalised to a direct line-of-sight path showed attenuation ranging from 25.1 dB to 98.5 dB. The width of that range sums up why an indoor plan must be built around the worst point, not the average.

## The hardest indoor spaces and their characteristics

Not every indoor space is difficult in the same way. The table below summarises the environments field teams meet most often and the main factor that makes communication harder:

**Types of indoor space and the factors that hinder communication**

| Environment | Hindering factor | Typical result |
|---|---|---|
| Basement and underground car park | Earth cover and reinforced concrete walls | The outside signal usually ends at the entrance |
| High-rise office and shopping centre | Metallised glass, many floor slabs, core walls | Drop-outs between floors and inside the core |
| Factory, warehouse, refinery | Metal roof and cladding, large metal equipment | Unstable signal from shadowing and reflection |
| Road and metro tunnel | Long, narrow, curved geometry | Rapid loss with distance from the portal |
| Mine gallery | Depth, rock mass, branching roadways | No connection at all to the outside network |
| Rubble and collapsed structure | Irregular mass of concrete and metal | Unpredictable coverage that changes from point to point |

The common thread is this: however strong the base station outside, without an arrangement that carries the signal in or regenerates it inside, coverage stops at the door.

## Regulation for indoor communication in Türkiye

Indoor communication is not only a technical choice; for some facilities it is a written obligation.

### Emergency announcement systems in buildings

Paragraph seven of Article 81 of the [Regulation on the Protection of Buildings from Fire](https://www.aile.gov.tr/eyhgm/mevzuat/ulusal-mevzuat/yonetmelikler/binalarin-yangindan-korunmasi-hakkinda-yonetmelik/) makes announcement systems that enable occupants to evacuate or move within the building mandatory in the following places: hotels, motels and dormitories with more than 200 beds; public buildings, shopping centres, supermarkets and industrial plants with a construction area above 5,000 m² or more than 1,000 users in total; and all buildings taller than 51.50 m. Under paragraph eight of the same article, the announcement system may also be used for other purposes, provided fire and emergency announcements take priority and automatically override those other uses. Article 83 of the regulation requires the cables running from the fire control panel to the voice evacuation system to withstand fire for at least 60 minutes.

### Communication and personnel tracking in mines

Article 9 of the [Regulation on Occupational Health and Safety in Mining Workplaces](https://www.mevzuat.gov.tr/File/GeneratePdf?mevzuatNo=18858&mevzuatTur=KurumVeKurulusYonetmeligi&mevzuatTertip=5) is explicit: the employer shall establish the necessary communication system throughout the whole workplace. The same article requires warning and other communication systems to be kept ready so that help, escape and rescue operations can be started immediately. Annex 1 of the regulation requires communication to be provided by suitable means covering the underground workings where they exist, and a sentence added in 2015 makes it mandatory in underground mines to set up a system through which the entry, exit and location of everyone working underground can be tracked accurately from the surface at all times. The equipment of that system must be protected against emergencies such as roof falls, flooding, explosion and fire, and its records must be kept for at least one year.

### Road tunnels

The paper [“Safety in Road Tunnels and EU Directives”](https://www.kgm.gov.tr/SiteCollectionDocuments/KGMdocuments/Otoyollar/YeraltiYapiIsltGuvSemineri/7Ekim/KarayoluTunellerindeGuvenlik.pdf), presented at the operational safety in underground structures seminar of the General Directorate of Highways (KGM, Türkiye’s national road authority), lists meeting the need for better communication between those in charge and emergency teams such as police, fire brigade and rescue teams among the aims of the European Union’s tunnel safety directives. The same paper notes that, as of 2009, only four of the 18 tunnels examined had traffic radio broadcasting along the tunnel, and that in two tunnels rescue vehicles could not cross between the tubes. That is why a system that can carry its own channel matters for maintenance and response teams working inside a tunnel.

## Indoor communication options

Indoor solutions fall into two families. The first carries the outside signal in; the second builds its own network inside. A robust plan usually includes one member of each family.

**Comparison of indoor communication options**

| Option | Depends on | Carries | Limit |
|---|---|---|---|
| In-building distributed antenna system (DAS) and repeater | Outside network and building power | Mobile voice and data | Falls silent when the outside network fails; needs fixed installation |
| In-building wireless (Wi-Fi) and wired telephone | Building infrastructure and power | Data, internal voice | Limited to fixed points; absent on construction sites and in rubble |
| Emergency announcement and emergency telephone points | Building fire infrastructure | One-way announcements, calls from fixed points | No two-way communication within the team |
| Licence-free handheld radio | Device and short distance | Instant voice | Short range across floors and thick walls |
| Professional radio with repeater | Frequency licence, repeater, in-building antenna | Voice, limited data | Repeater installation and maintenance burden |
| Mesh network | Devices reaching each other | Written messages, location, status | No voice; needs relay placement in deep concrete |

A distributed antenna system or repeater is an extension of the outside network into the building; it works well every day the network works, but when the network is congested or collapses, the indoor space goes silent too. Radio is indispensable for instant voice coordination indoors; its limits are range across floors and the absence of a written trail. A mesh network is a structure in which devices relay messages to one another with no base station; we explained [how a mesh network works](/en/blog/what-is-a-mesh-network) with diagrams in a separate article. The strength of mesh indoors is that, as the team spreads out, devices positioned at points such as stairwells, floor entrances and gallery mouths carry the signal in a chain. Indoor low-power wide-area networks are being studied academically too: a [2025 study on an indoor LoRaWAN network](https://doi.org/10.31466/kfbd.1577612) by Yıldız and Karlık of Bursa Uludağ University shows the importance of received signal strength and signal-to-noise ratio values in network planning, and that a higher spreading factor is needed as the distance between the end device and the gateway grows. In plain terms: as distance and obstacles increase indoors, the same link needs slower but more robust transmission.

## A benchmark example: in-building coverage for emergency responders

What does “adequate coverage” mean indoors? [Rule WAC 51-54A-0510](https://lawfilesext.leg.wa.gov/law/WACArchive/2020/htm/WAC%20%2051%20%20TITLE/WAC%20%2051%20-%2054A%20CHAPTER/WAC%20%2051%20-%2054A-0510.htm), part of the building code of the US state of Washington, gives a concrete benchmark. In buildings that require emergency responder radio coverage, the inbound signal level must be a minimum of −95 dBm throughout the coverage area, and the building owner must have the system tested to verify that two-way coverage on each floor is not less than 95 percent. For the test, each floor is divided into roughly 20 equal test areas; failure of more than one area means the floor fails. The rule ties the installation of the system to standard NFPA 1221 of the US National Fire Protection Association.

Türkiye has no exact equivalent of this benchmark, but the approach transfers: define coverage floor by floor, with a measurable threshold and test areas, rather than for the building as a whole. Drawing up a list of the “20 weakest points” in your own facility and sending a message from each of them in every drill is a simple application of the same logic.

## An indoor communication plan, step by step

1. **Identify the worst point**The deepest floor, the farthest gallery, the largest metal-clad hall. The plan is built for this point; do not let coverage at the entrance mislead you.
1. **Write down the obligations**If your facility falls under the announcement system, mine communication or workplace emergency plan rules, put the relevant articles at the top of the plan and check whether existing systems meet them.
1. **Choose channels from both families**Plan a system that carries the outside signal in together with a system that builds its own network inside. Write the need for voice and for written alerts separately.
1. **Mark the relay points**Stairwells, floor entrances, tunnel and gallery mouths and the building entrance are where the signal changes hands. If you use a mesh network, mark on the sketch where relay devices or the station will stand.
1. **Plan for location uncertainty**Satellite-based position may not always be available indoors. Standardise zone and floor names; ask teams for a short written notice on entry and exit.
1. **Treat lone working separately**For an employee entering an enclosed space alone, set a rule for status reports at fixed intervals and a one-touch [emergency alert](/en/blog/emergency-button).
1. **Drill from the worst point**Start the drill not at the entrance but at the point you identified in step one; record how many seconds the message took and how many people it reached.
1. **Tie in records and review**Make sure every alert from the enclosed space is logged with a timestamp; update the relay points after every drill and real incident.

We covered the construction-specific chain of responsibility and shift handover in our article on [construction site team communication](/en/blog/construction-site-team-communication), and use in industrial plants on our [operational communication](/en/operational-communication) page.

## Our approach

When we designed BosNets, we treated indoor space as a normal part of the field, not an exception. That is why every BosMag that joins the network is also a relay: as the team spreads into the basement, across floors or along a gallery, the devices in between carry the signal, and a packet can make up to five hops within the network. No separate step is needed to set up a relay.

We state our limit openly too. BosMag’s single-hop range is 5 km in open terrain and about 2 km in urban areas; dense structures and rubble reduce that figure. In deep, reinforced-concrete spaces the answer is not to exaggerate range but to put the relay in the right place: the solar-powered [BosBase](/en/bosbase) station, placed at the building entrance or on a vehicle roof, takes on that role with no installation. Because the devices operate in the licence-free 869.4–869.65 MHz band, no separate frequency allocation is needed for the facility.

We do not aim to stand in for radio indoors; voice coordination is radio’s job. We carry written messages, location and emergency alerts, and log all of them with a timestamp; the browser-based [BosLog](/en/boslog) interface gathers that record at the coordination centre. Because map data is stored on the phone, the BosApp map also opens in enclosed spaces with no coverage. See the [BosMag page](/en/bosmag) for product details.

— Emir Tanrıver, co-founder, BosNets

## Frequently asked questions

### Why does my mobile phone have no signal indoors?

Outer walls, floor slabs, metal surfaces and earth cover weaken the signal from the base station. In modern, thermally efficient buildings, metallised glass and foil-backed panels increase that loss further. The loss varies widely from building to building and from point to point within the same building.

### Is there a legal obligation for indoor communication?

For some facilities, yes. Places such as high-rise buildings, large shopping centres and industrial plants must have an emergency announcement system, and mining workplaces must have communication covering the underground workings and an underground personnel tracking system. Work out which scope your facility falls under together with your occupational safety specialist.

### Does a mesh network work in a reinforced-concrete basement?

Because devices relay one another, coverage depends on how the team’s devices are spread out; devices standing at points such as floor entrances and stairwells carry the signal in a chain. In dense concrete and deep enclosed spaces the range drops; in that case a relay station placed at the entrance connects the network to the outside.

### Should I use radio or a mesh network indoors?

They meet different needs. Radio carries instant voice; a mesh network carries written messages, location and status, and keeps a record. Most indoor plans include both; BosNets complements radio rather than replacing it.

## Sources

- [ITU-R P.2109-2: Prediction of building entry loss (08/2023)](https://www.itu.int/rec/R-REC-P.2109-2-202308-I/en)
- [NIST Technical Note 1552: Attenuation and Variability of 750 MHz Radio Wave Signals in Four Large Building Structures (2009)](https://nvlpubs.nist.gov/nistpubs/Legacy/TN/nbstechnicalnote1552.pdf)
- [Regulation on the Protection of Buildings from Fire (Official Gazette, 19 December 2007, no. 26735)](https://www.aile.gov.tr/eyhgm/mevzuat/ulusal-mevzuat/yonetmelikler/binalarin-yangindan-korunmasi-hakkinda-yonetmelik/)
- [Regulation on Occupational Health and Safety in Mining Workplaces (Official Gazette, 19 September 2013, no. 28770)](https://www.mevzuat.gov.tr/File/GeneratePdf?mevzuatNo=18858&mevzuatTur=KurumVeKurulusYonetmeligi&mevzuatTertip=5)
- [General Directorate of Highways (KGM): Safety in Road Tunnels and EU Directives (Seminar on Operational Safety in Underground Structures, October 2009)](https://www.kgm.gov.tr/SiteCollectionDocuments/KGMdocuments/Otoyollar/YeraltiYapiIsltGuvSemineri/7Ekim/KarayoluTunellerindeGuvenlik.pdf)
- [Washington Administrative Code 51-54A-0510: Emergency responder radio coverage](https://lawfilesext.leg.wa.gov/law/WACArchive/2020/htm/WAC%20%2051%20%20TITLE/WAC%20%2051%20-%2054A%20CHAPTER/WAC%20%2051%20-%2054A-0510.htm)
- [Yıldız, Ö., Karlık, S. E. (2025). Regression Analysis of SNR and RSSI Relation in an Indoor LoRaWAN Network with MATLAB Curve Fitting Method. Karadeniz Fen Bilimleri Dergisi, 15(2)](https://doi.org/10.31466/kfbd.1577612)

- Indoor
- In-Building Coverage
- Tunnel
- Mining
- Mesh Network

## Related pages

- [Construction Site Team Communication](/en/blog/construction-site-team-communication)
- [What is a mesh network? Explained with diagrams](/en/blog/what-is-a-mesh-network)
- [BosBase relay station](/en/bosbase)
- [Operational communication](/en/operational-communication)

## Let’s test the worst point of your indoor space together

Tell us what your facility needs and we will plan a demo or a field trial with you.

[Get in Touch](/en/contact)
[All posts](/en/blog/)
